Tattoo removal machines work by using various technologies to break down the ink particles in the skin so that they can be eliminated by the body’s immune system. The most common type of tattoo removal machine is the Q-switched laser. This laser produces high-intensity light pulses that target the pigment in the tattoo. The heat generated by the laser causes the ink to fragment, which can then be eliminated by the body.
Laser tattoo removal machines can safely pulsing high-intensity wavelengths into an area of skin coated with ink, which then breaks the ink down into small particles. These particles are then gradually cleared by the immune system. It only targets hyperpigmented skin and will not harm any surrounding skin.
You need to know that there are two types of tattoo removal machines, PicoSure and Q-Switched Nd: YAG lasers. These two machines are very popular for tattoo removal.
The main difference between them is the speed and strength of the machine. In terms of speed, the pico laser tattoo removal machine operates at trillionths of a second, with pulse widths 100 times faster than Q-switched lasers.
In terms of intensity, the Q-Switched laser tattoo removal machine uses a high-intensity, but ultra-short pulse duration technique. It’s been billed as the “gold standard” for tattoo removal and runs in nanoseconds or billionths of a second.
On the one hand, the pico laser is faster, but Q-Switched is the ultimate winner after combining the efficiency, performance, and cost of both lasers.
First, since picosecond laser tattoo removal machines normally only have a single 755 wavelength, they cannot remove all ink colors. This means that customers need to spend higher costs and longer treatment times. While a Q-Switched laser generally provides the following three wavelengths, it can target tattoo removal.
1064nm laser: for removing dark tattoos, eyeliner, lip tattoos, eyebrow tattoos, and traumatic pigmentation and freckles.
532nm laser: suitable for the treatment of red or tan tattoos, lip lines, eye lines and eyebrow tattoos.
1320nm laser: for skin whitening, pore shrinking, and deep cleaning.
Note: it needs to be used with carbon powder.
However, Is there a machine that includes Q-Switched and Picosecond technology?
Yes, Konmison provides you with a professional machine with a ND: YAG Pico Laser handle to help your customers address more skin problems.
Although lasers are the most effective way to permanently remove tattoos, the color of the tattoo affects how long it takes to remove it.
White ink is the most difficult to remove, followed by light green and light blue. Because it reflects most of the wavelengths. On the contrary, black is the easiest to eliminate since it absorbs all wavelengths. This means that browns, dark greens, and dark blues are also quickly excreted from the body. Therefore, colors that cannot absorb most wavelengths take longer to remove.
Yes, the laser can completely remove tattoos and is the safest and most effective method. However, you may not be able to completely remove the tattoo in one go, and it will generally take several sessions to achieve your desired results.
The cost of a laser tattoo removal machine varies widely. Prices for tattoo removal machines range from $100 to $180,000. This is determined by the quality and brand of the machine. There is even a tattoo removal pen that only cost around $20. For more cost information, you can read the post How Much Does A Laser Tattoo Removal Machine Cost.
Yes, you can remove your tattoo at home. However, most people are inexperienced in removing tattoos, which may hurt the body. Professional tattoo removal machines can choose spot size, pulse duration, or wavelength, which can customize for different tattoo removal. Therefore, while it is cheaper to remove a tattoo yourself at home, it is recommended that you go out for help with professional tattoo removal.
This is because the metal in the ink is oxidized, causing the color to temporarily darken. But this is normal and does not affect your tattoo removal.
In general cases, multiple treatments are required to obtain ideal results. The number of treatments for a specific patient is determined by the concentration and depth of the pigment in the affected area, the composition of the pigment, the laser dose used for each treatment, and the absorption of pigment particles by macrophages in the patient. determined by other factors. Generally, exogenous pigments should be treated more than 3 times, and endogenous pigments should be treated more than 5 times to obtain satisfactory results. In a few patients, the effect is still unsatisfactory after multiple treatments.
The two treatments should be about 1-2 months apart to allow enough time for the crushed pigment particles to be absorbed.
It is not recommended that you shower immediately after removing the tattoo. At that time, your skin is still relatively sensitive. You should keep your skin dry and clean and need to wait until the next day to shower, which is 24 or 48 hours later.
When an experienced professional removes a tattoo for you, leaving a scar is very rare. First, you need to choose a reputable laser removal facility. Followed by a proven clinical approach and proper follow-up of post-treatment precautions. So that you can avoid scarring from tattoo removal.
After laser tattoo removal, be sure to keep the treated area dry and clean. Avoid any form of exogenous substances that irritate the wound (such as alcohol and cosmetics, including alcohol). Do not squeeze, press, touch, or rub the treated surface.
After picosecond laser surgery, sun exposure needs to be avoided in order to prevent recurrence and melanin deposition in the treated area. When going out, you need to bring an umbrella for shade and wear sunscreen. Avoid photosensitive foods (such as celery, leeks, parsley, etc.) and photosensitive drugs. People with sensitive skin should avoid foods that may cause skin allergies.
Due to the enhanced skin absorption capacity and accelerated metabolism after laser surgery, some patients may experience dry skin and dehydration, so skin care must be performed after surgery to replenish sufficient moisture and nutrients. Drinking more water will improve blood circulation, which will allow more white blood cells to work to remove the ink. Drink plenty of water at the same time to enhance immunity. Some patients may experience localized redness and swelling after surgery, which usually resolves spontaneously within 24-72 hours.
The cost of a tattoo laser removal machine varies widely depending on the type and quality of the machine. Prices can range from several hundred to tens of thousands of dollars, depending on the machine’s features, brand, and level of sophistication.
For example, a small, portable, low-power Q-switched laser machine suitable for home use may cost several hundred dollars. On the other hand, a high-end, professional-grade machine with advanced features like multiple wavelengths, pulse durations, and spot sizes may cost tens of thousands of dollars.
There are several types of tattoo removal machines, each with its own advantages and disadvantages. The best tattoo removal machine depends on factors such as the type of tattoo, the skin type of the patient, the experience and training of the operator, and the available budget. Here are some of the most commonly used tattoo removal machines: Q-switched lasers, Pico lasers, IPL machines, Fractional lasers.
If you want to know further details, you can head over to our professional tattoo removal machine.
Recent statistics show that 4 in 10 Americans over the age of 18 have at least one tattoo, and another 20% are considering getting ink. This trend doesn’t seem to be going away any time soon either...