Step-by-Step Guide to Installing PVC Skirting Boards Right

Step 1: Gather Your Tools and Materials

Before you begin installing PVC skirting boards, ensure you have all the necessary tools and materials at hand:

• PVC skirting boards
• Measuring tape
• Level
• PVC adhesive or screws
• Mitre saw or hand saw
• Caulk gun
• Pencile
• Sandpaper

Step 2: Measure the Walls

Start by measuring the walls where you plan to install the skirting boards:

• Use the measuring tape to determine the length of each wall.
• Take note of door frames, corners, and any irregularities.

Step 3: Cut the PVC Skirting Boards

Once you have the measurements, it’s time to cut your PVC skirting boards:

• Use the mitre saw to make precise cuts at a 45-degree angle for corners.
• For straight cuts, measure and mark before cutting.
• Use sandpaper to smooth the edges of the cut boards.

Step 4: Dry Fit the Boards

Before permanently attaching the skirting boards, do a dry fit:

• Place the cut boards against the walls to check for proper fit.
• Make any necessary adjustments before fixing them in place.

Step 5: Attach the Skirting Boards

Now, it’s time to secure the boards:

• If using adhesive, apply a bead along the back edge of the board.
• Press the board against the wall, ensuring it is level.
• If using screws, drill pilot holes and then fix the boards in place.

Step 6: Fill Gaps and Paint (if necessary)

After attaching, check for any gaps:

• Use caulk to fill gaps between the boards and walls.
• If you opted for painted skirting boards, apply paint as needed.

Step 7: Final Touches

Complete the installation with final touches:

• Ensure all boards are securely attached and level.
• Clean any excess adhesive or caulk for a polished look.
• Enjoy your new PVC skirting boards!

For more information, please visit how to install pvc skirting boards, China Plastic Skirting Factory, pvc corner profile.