Lately, I’ve been doing some digging around the web and have noticed one question that has come up time and time again. That question is: How can you tell if its a quality piece of furniture?
People can’t seem to tell the difference from the good to the crap. It’s a problem when the cheap imitation stuff looks and feels like a quality piece but over time proves that to be wrong. Here is a few things on how you can weed out the bad from the good.
The quickest and easiest way to tell the difference is how it is made. Most modern furniture is assembled using veneer. Veneer wood is a flimsy material only being 3 mm (1/8 inch) thick. Veneer is obtained either by “peeling” the trunk of a tree or by slicing large rectangular blocks of wood known as flitches. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced.
Most quality pieces, at least wooden pieces, are 1 inch thick. This makes the piece much more durable. You want your furniture to be a solid piece. If it flimsy and created from cheaper material, you’re going to get exactly what you’ve paid for.
On wooden furniture, a good place to tell the quality of construction would be the joints. Good quality furniture will have joints that are screwed, or doweled. The very best joints are dovetailed, mortise-and tenon. Re-enforcing block attached at an angle should be used on corners. Indications of poor quality would be joints that are nailed, stapled, or will have visible glue.
The problems of having the furniture assembled by means of being nailed or stapled is that it can easily come apart. Staples will come apart over time do to extensive use.
Quality pieces will be leveled with the floor. Poor pieces of furniture will wobble on any floor. Your solid hardwood furniture will for the most part always be leveled with the floor. They are very stable and the only way to get them to shake is if it was in an earthquake. If the piece does wobble, this is usually a tell-tale sign that the floor is not leveled. This is actually the case with our showroom.
This one is important especially when it comes to tables. Wood on a good quality furniture piece should be reasonably scratch resistant, if it dents easily the furniture will not stand up to much use. To test this, you can try drawing a line on an unexposed area with your fingernail to see if it leaves a visible dent.
On our furniture for example, we use a standard catalyzed varnish. The finish gives you the freedom not needing to baby your furniture. You’re able to place a sweaty place of water on it and not worry about water marks or even place a boiling pot of water on it and let it go to room temperature.
It can be more difficult to tell quality upholstered furniture, because its frame is often concealed by fabric. Here is what you can do though, when you go to a retail location the sales person should be able to tell you all the information about the product right away. If they can not easily provide this information, or they hesitate do not buy from them, move on to another location. The sales person should have good product knowledge. They should be able to provide some sort of information to you regarding the piece.
Find out what the density of the foam is. Upholstered furniture should have a seat foam density rating of at least 1.8 pounds or higher. If the chair or sofa has removable seat cushions, unzip them and take a look inside. The foam block should be wrapped in fiber. Very high end ones will probably have a protective inner cover. Removable back cushions could be made of foam, but will probably be loose fill. Loose fill cushions should have multiple internal compartments. These internal compartments stop the fill from settling.
Look at the underside of the piece. Does it look like the same wood to you as on top? If not, then most probably it is veneered. In solid wood pieces, the wood will look the same in both visible and hidden parts (or almost the same as the better part of a board is usually turned out). The underside will most likely be some type of plywood or veneered wood.
Furniture made completely from solid wood is more expensive than furniture made from a combination of veneers and solid wood. This stands to reason since more high-quality lumber is needed. Veneer crafted furniture loses it’s value over time dramatically as it won’t stand the test of time compared to solid hardwoods. Solid hardwood retains its value much longer since it is built to last for generations.
There is a belief that solid wood furniture is generally heavier than particle board or MDF (medium density fiberboard) furniture. Yes and no. First of all there are a lot of types of wood which are light in weight such as pine or cherry. Besides, the more glue there is in an MDF or particle board piece the heavier it is. So such furniture can be quite weighty.
But there is a twist! For casegoods, heavier does NOT mean it is better quality. Beginning in the 1980′s and especially since the early 2000′s, there has been an explosion of cheap mass-produced furniture made from MDF (medium density fiberboard) covered with a wood veneer. MDF is heavier than wood – even hardwoods. So all those modern casegoods that weigh a ton? Yep, you guessed it. It’s a pretty good clue that they are made from MDF, not wood. Because MDF is easier to damage, it just won’t last like real wood does.
Chair backs, table skirts, arms, legs and other curved furniture parts are tell-tale signs of quality. If a part is a single piece of solid wood that has been steam bent, it will last longer and look more graceful than pieces fashioned from thin strips of laminated wood. Check for bulges or wrinkles along the inside corner of a bend, as this indicates that the internal fibers of the wood have buckled during the bending process. Cracks along the outer edge indicate that wood fibers have been stretched which will also weaken the part.
This is a great way to tell if it manufactured or not. Since veneer wood is a combination of different woods, it is crafted to have a uniform look to it. Solid hardwoods are made from just that, a solid hardwood. Solid hardwood furniture pieces show the imperfection of the wood because it is a product of nature.
Veneer is a man-made, manufactured wood to remove those imperfections and give the furniture a unified look. Some like the imperfections of the wood and some don’t.
There are a lot of benefits of owning a real solid wood furniture. It gives you the confidence that you won’t have to replace your furniture for many years. And even if you decide to sell it the presence of solid wood in your items will give them a great selling power. Enjoy peace of mind with your solid wood furniture.
When you’re shopping for furniture, it’s essential to assess the quality of a piece. Unfortunately, there’s a lot of poorly-built furniture out there, and it’s not always obvious, at first glance, whether it’s worthy of your investment.
How do you know what to avoid, and what to look for? Learning a little about the way furniture is made is a great way to make your shopping decisions easier.
There are some key points to consider, no matter what type of furniture you’re looking for. Once you’ve identified the style that you’re looking for, you can then assess individual items, such as:
Follow along with our tips, and you’ll be ready and prepared for your next furniture-buying outing!
"What is underneath the wood veneer is often where the problem originates. Pressboard (sawdust and glue) does not provide much strength."
Let’s review what veneer is. In its best uses, veneer is made of a thin layer of high quality, real wood. This is applied to a solid wood base. This provides an all-wood, solid piece of furniture that has a matching grain and sometimes a more affordable price point.
At its worst, veneer is wood laminate. This is a layer of plastic or paper that has been printed with a reproduction of wood grain and glued on top of cheaper materials, such as particle board.
How do you tell the difference? Let’s start with real wood veneers. Since they are made of actual wood, they’ll look natural. Here’s the way to look for it - it may require a little bending over.
Spotting wood laminate is often easier. You can open drawers to see if there if it has been applied to particle board or low-grade lumber. Examined up close, you’re likely to spot that the pattern of the “wood grain” is repeated over and over.
It also won’t have the texture and feel of real wood grain when you run your hand over it. Overall, the piece will be more lightweight and probably have some other “Red Flag” issues that we’ll discuss below.
Good furniture has features that are easy to spot when you know where to look. It’s okay to open up drawers, sit on chairs, and look at the actual construction of your wood furniture when you’re shopping.
"Quality is what separates us from the competition. Our history in custom building high-quality real wood furniture makes us very picky when choosing furniture to carry."
When you’re looking over the piece, watch for these signs that it’s been made well:
Poor craftsmanship will make your furniture investment a short-lived disappointment. There are many tell-tale signs of a poorly made piece that you can train yourself to look out for.
"Often times you can tell if a piece of furniture is poorly made just by the way it looks and feels."
While you’re looking over your prospective furniture choice, be alert to some of these indicators of shortcuts in the manufacturing process:
Wood furniture should be not just attractive, but also durable and low-maintenance. There’s a reason that good wood furniture becomes antique and lasts for decades - it’s an amazing material.
Making just the right choice of a new piece for your home should assure you that your furniture will be of high quality and give you years of enjoyment. Following along with our tips for smart shopping should make your next furniture shopping experience both better-informed and enjoyable!
If you want to learn more, please visit our website Bamboo Leaves for United Arab Emirates, Purchase fresh bamboo leaves in bulk, Fresh Houba Leaves For Sushi Product.