Anchor Site Testing

06 Mar.,2024

 

There are two types of test – destructive and non-destructive.

Destructive tests

If the following criteria apply, destructive tests are the right choice:

  • Damage to the base material can be accepted
  • Base material is relatively homogeneous
  • You aim to achieve the maximal achievable resistance

Destructive tests are tensile and/or shear tests up to the ultimate load of the anchor.

The minimum number of test trials is based on the chosen testing and evaluation method. Usually between 5 and 15 test trials are needed for a proper evaluation.

Statistical or simplified evaluation according to the chosen evaluation method.


Non-destructive tests

If the following criteria apply, non-destructive tests are the right choice:

  • Damages to the base material must be avoided
  • Base material is relatively inhomogeneous
  • You don't need to achieve the maximal achievable resistance 

Non-destructive tests are tensile and/or shear proof tests to a predefined test load.

The minimum number of test trials is based on the chosen testing and evaluation method. Usually between 5 and 15 test trials are needed for a proper evaluation.

Calculated test load and simplified evaluation according to the chosen evaluation method.

 

For more information Bolt Pull Test, please get in touch with us!