Bollards and posts are a highly effective way to enhance the security of your land or property – providing they are installed properly. An inadequate installation can limit the effectiveness of your security measures and, more importantly, pose an extreme safety risk. That’s why it’s essential to install security bollards and posts in accordance with established guidelines. In this article, we tell you everything you need to know about installing bollards and posts . However, we always recommend using a professional installation service like ours to ensure maximum security and safety.
One of the most frequently asked questions when it comes to installing security posts is how deep should a bollard be buried, but there are numerous variables to consider when determining the depth of a bollard.
For example, the type of bollard you’re installing and the mounting method used can impact the requisite depth. As a general rule, however, fixed bollards that are installed with concrete should be set at least 450 – 600 mm into the ground.
Furthermore, the type of soil or terrain in which the bollard is being installed can also play a crucial role. Sandy soils or those that are loose and less cohesive may require deeper installations or additional stabilisation methods compared to more compact soils.
On the other hand, rocky terrains may pose challenges and might necessitate modifications in depth or the use of specialised equipment.
The purpose of the bollard is also vital in deciding the depth. Commercial bollards meant for high-security areas – like those around governmental buildings or vital infrastructure – might have more rigorous depth and installation requirements to withstand potential vehicular threats.
It’s always advisable to consult with a bollard installation expert or refer to specific guidelines when determining the exact depth for your needs. Proper installation will not only ensure not the functionality of the bollard but also its longevity.
To extend the lifespan of your bollard, it’s also important to maintain it properly. Our dedicated guide to bollard maintenance will help you do so!
Once you know how deep it will be buried, it’s now time to install your security bollard. The installation process can vary depending on the type of bollards you’re using, so it’s vital to adjust the installation method accordingly.
Using professional installation services is always the best way to ensure that bollards are situated effectively but – if you do want to install bollards yourself – it’s vital to follow the manufacturer’s guidelines.
In addition to this, you’ll need to consider legislative and regulatory requirements if you are installing bollards on public land.
Before you begin the installation process, mark out where each bollard will be installed. We have also written a guide on bollard spacing to help direct you on this part of the process.
Then, scan the area for potential hazards, such as wires or pipes. Specialist scanners MUST be used to confirm that the installation won’t interfere with existing underground infrastructure. Otherwise, the process will become very dangerous. Following this, you can begin the installation process.
Written by our team of industry experts, here is our recommendations for installing security bollards: